Buckled Up Butterfly Vehicle Decal (5.25" x 6")

• Suitable for outdoor applications, such a vehicles.
• Durable vehicle-grade vinyl with removable transfer paper.
• Waterproof and weatherproof making it resistant to damage from the elements, including scratches, sunlight, and rain.
• Intended for outside window application on vehicles so that it can be seen with tinted windows.
• This version does have a clear film behind the letters.

For best results, please follow these instructions.

• Clean the surface with window cleaner to remove all dirt, grime, etc. 
• Without removing the paper backing, position the decal on the surface where you want it to be.
• Once the decal is in position, place masking tape along the top edge to hold the decal in place.
• Lift the decal up and remove the backing paper completely.
• Gently lower the decal with the transfer tape back down to the surface and rub it down lightly with your hand.
• Take a squeegee or credit card and firmly run the decal down to the surface. The transfer tape should still be on the decal. This allows you to rub the decal down without scratching or damaging it.
• Finally, peel off the transfer tape and masking tape gently. It should lift easily, leaving no sticky residue.
• Your decal is now complete. If there are any bubbles present under the decal that cannot be removed by working them to the edge, a small needle or pin can be used to puncture the bubbles and remove the air. A small pin hole will not be seen after the air bubble has been worked out.